Video "Graduation: Fatally Denied"
Fire Safety Video for Campus Living
14 min (via You-Tube Video)
Video: Seton Hall Univ. Fire
Dana Christmas Story
Fire Safety & Prevention Program
If possible, every fire and explosion occurring on NMSU property or in NMSU-occupied spaces, including those discovered after extinguishment, should be reported so we can learn from our mistakes (NMSU Police 646-3311). If an extinguisher was used or discharged, the NMSU Fire Department (646-2519), or at a minimum the Office of Facility Services (646-7114), needs to be notified so the extinguisher can be serviced. Major incident scenes should not be disturbed until investigated and released by the NMSU Police.
The NMSU Fire Department provides fire protection for NMSU campus and is the fire authority for the University. EH&S is responsible for occupational fire safety and shares fire inspection duties with NMSU FD.
The NMSU Fire Dept provides fire and an intermediate level EMS services to the campus as well as mutual aid assistance to City of Las Cruces and Dona Ana County's 15 fire districts. Additional services are fire safety inspections, and public education, including fire extinguisher training, hazmat and confined space rescue. NMSU FD consists of 3 career managers, 14 student fire fighters, 1 student administrative assistant, 1 extinguisher technician, and 1 special projects coordinator. The student fire fighters provide Fire, EMS and other emergency responses and responded to 423 emergency calls for assistance during the last fiscal year. Additional information is available at NMSU Fire Department
The following topics and question/answer section provide useful information on the fire safety program at NMSU.
NMSU Fire Department Website
NMSU Fire Prevention Program
(on Fire Safety)
- General Fire Safety
- Q- What should I know about fire extinguishers to be prepared? (Quick Guide)
- Q- Should I try to fight a fire?
- Q- What do you do when you only smell smoke (can't find/see fire)?
- Fire Extinguishers
- Q- How do I use a fire extinguisher?
- Q- Are there different kinds of extinguishers for different kinds of fires? -- (also see link)
- Q- How often are fire extinguishers to be inspected, tested or serviced?
- Q- Do they need to be serviced every year?
- Q- Who do you call when a fire extinguisher needs service, is damaged, or is missing?
- Q- Where should extinguishers be located?
- Q- How should the extinguisher be mounted?
- Q- Who do you call when you need additional fire extinguishers?
- Q- How do fire sprinklers work?
- Q- When one sprinkler goes off, won't they all go off?
- Q- Will smoke set off the sprinkler system?
- Q- Can sprinklers go off by themselves?
- Q- Do we have sprinklers in all buildings? Why not?
- Fire Alarms
- Q- Do we have fire alarms in every building?
- Q- Should hear the fire alarm in throughout a building, no matter where you are?
- Q- Do we have many false alarms?
- Fire Prevention
- Q - What can I do to improve fire safety in my area?
- Q - What fire safety equipment should be available? - for an office? for a lab? for a shop?
- Q - What can I do to improve fire safety at home? (answer: see Tips for home fire safety)
- Q- What are flammables and combustibles?
- Q- How much flammable/combustible materials can I have in my area?
General Fire Safety
Answer - Assuming that you have been trained, are capable and willing, a charged extinguisher (a proper extinguisher for the fire) is available and the fire has been reported (alarm sounded), you may attempt to extinguisher a small fire, but then only if you can do so safely and with a clear path out behind you.
Answer - If you see or suspect a fire in an area, don't hesitate! Pull the building fire alarm and evacuate the building. NOTE: If your facility has specific procedures to be followed when the fire alarm is sounded, rather than evacuation, they should be followed.
Answer - Generally all fire extinguishers are used in a similar fashion: carry the extinguisher to the fire, pull the pin, point the hose, nozzle or horn at the base of the fire, and squeeze the handle. Use a sweeping motion (back and forth) to cover wider areas. When the extinguisher runs out, leave.
It is simple, but if you haven't operated an extinguisher it is easy to get confused, possibly hysterical during an emergency, possibly burned. So you need to be shown how and gain some hands-on experience under controlled conditions.
Under New Mexico Health and Safety regulations, all employees must be trained on the use of the fire extinguishers in their area. Hands-on extinguisher training is available.
Answer - Yes, there are. The universal standard extinguisher (good on most small fires you might encounter) for the last 10-20 years is the "ABC", or multi-purpose extinguisher. It can be used on a Class A, B or C fire.
- Class A is ordinary combustible materials such as wood, cloth, paper, etc.
- Class B means flammable liquids, such as oil, gasoline, kerosene, etc. and
- Class C refers to the presence of energized electrical circuits (e.g., an electric motor, electrical wiring, etc.).
However, NMSU has several other kinds of extinguishers on campus which are only effective when used on the kind of fire for which they were intended. These include:
- Pressurized water - Class A only
- Carbon dioxide - Class B and C only
- "B-C" Dry chemical - Class B and C only
- "D" dry chemical - for self-spontaneous igniting/burning fires, usually these involve combustible metals, such as magnesium, zirconium, potassium, and sodium. These are uncommon, but may occur with materials in chemistry, science and engineering labs.
For more information see the attached link.
Answer - Extinguishers, fire hoses and other fire safety equipment (alarms, exit signs, emergency lights) need to be checked on a regular basis to ensure they are in working condition. Typically a quick visual check is to be done at least monthly by an employee or the monitor in the area. Under law (an OSHA regulations for NMSU) extinguishers and hoses must be checked and documented at least once a year by a qualified inspector. They also must have a sign-off tag (or other documentation) to verify that they have been inspected.
Extinguishers must be recharged anytime that they have been used (of course), if the pin has been pulled (seal broken), or the gauge is not in the green (or whatever color the proper pressure area happens to be). Even if an extinguisher was only used a small amount it must be serviced as the used powder clogs the valve and prevents reuse.
Anyone noting an extinguisher or fire equipment that needs service should report it to the Fire Section or OFS/Facility Services at 646-7114 (if the problem is not corrected, please call Environmental Health and Safety 646-3327).
Answer - They may not need to be serviced but even if an extinguisher hasn't been used, it still needs to be inspected to make sure there's no corrosion, that nothing has been damaged, and that everything is set for it to operate properly when needed. In many cases, they just need to be examined and/or weighed (CO2 extinguishers). However depending on extinguisher type and age (usually every 6 years for those over 12 year old) they must be taken apart, inspected internally or pressure tested, then reassembled, recharged and permanently marked with a label indicating the service date. .
Answer - By law, Extinguishers must be conspicuously located and readily accessible for immediate use in the event of fire. Extinguishers must be distributed in such a way that the amount of time needed to travel to their location and back to the fire does not allow the fire to get out of control. OSHA requires that the travel distance for Class A and Class D extinguishers not exceed 75 feet. The maximum travel distance for Class B extinguishers is 50 feet because flammable liquid fires can get out of control faster that Class A fires. There is no maximum travel distance specified for Class C extinguishers, but they must be distributed on the basis of appropriate patterns for Class A and B hazards.
They are to be located along normal paths of travel and egress. Wall recesses and/or flush-mounted cabinets should be used as extinguisher locations whenever possible, but extinguishers should be clearly visible. In locations where visual obstruction cannot be completely avoided, directional arrows or signs are to be provided to clearly indicate the location of extinguishers..
Portable extinguishers must be maintained in a fully charged, operable condition and kept in their designated locations at all times when not being used. Extinguishers shall be installed on hangers, brackets, in cabinets, or on shelves and so installed that the top of the extinguisher is not more than 3-1/2 feet (40") above the floor.
Extinguishers mounted in cabinets or wall recesses or set on shelves will be placed so that the extinguisher operating instructions face outward. The location of such extinguishers will be made conspicuous by marking the cabinet or wall recess in a contrasting color which will distinguish it from the normal decor.
Answer - Call OFS/Facility Services at 646-7114.
Answer - Call the NMSU Fire Marshal's office if you need additional extinguishers or have concerns about the condition or type of extinguisher. To obtain additional extinguishers the Fire Section likes to know why. For instance, is the nearest fire extinguisher over the maximum travel distance (depending on the hazard type as described above) from the hazard, because a new or different hazardous material being used or a change in room configuration has increased the travel distance to the nearest fire extinguishers.
Answer - At each sprinkler, the water under pressure in the pipe is held back by a plug held in place either by metal parts or a small glass vial filled with fluid. When sufficient heat hits a sprinkler, the special solder holding the metal parts together melts, or the fluid in the glass vial expands enough to break the glass. In either case, the plug is released and the water begins to flow.
Answer - Only in the make-believe world of movies! In real life, each sprinkler is independent and has to be subjected to direct heat to go off.
Answer - Absolutely not. It takes actual heat, usually 165 degrees Fahrenheit, to set off a sprinkler.
Answer - Rarely. Fire sprinklers are extremely reliable--the odds against a sprinkler ever just going off for no known reason are less than 1 in 3,325,000.
Answer - Fire sprinklers are only required in certain kinds of buildings--hospitals, for example. Also, they are often added to other buildings during the design phase in order for the architect to be allowed to make a building bigger or taller than the building code would have otherwise permitted. It is general policy to provide sprinklers for all new construction, and try to retrofit sprinklers into the existing unsprinkled facilities.
Answer - Ideally, yes. We're aware that, in some of the campus facilities, there are areas of reduced, or even nonexistent audibility. NMSU is currently upgrading the systems across campus. Any concerns or complaints in this area need to be referred to someone in the Fire Section office, to be sure that they are aware of all such situations.
Answer - There is a fairly low incidence of true false alarms, where someone sets off the fire alarms when there is no fire or other emergency. Some false alarms may be result of change or construction. These activities can create conditions (smoke, dust, etc.) which can activate fire detection systems.
Answer - First line supervisors should conduct work site surveys of their area on a regular basis, at least quarterly. These surveys should include observations of worksite safety and housekeeping issues and should specifically address
- proper storage of chemicals and supplies,
- availability and condition of fire safety equipment
- unobstructed access to fire extinguishers, and
- emergency evacuation routes.
Also, they should ensure that an emergency evacuation plan is present in work areas and that personnel are familiar with the plan.
Emergency egress should be kept clear and every exit clearly visible, or the route to it conspicuously identified in such a manner that occupants of the building will readily know the direction of escape from any point. Main building exit and main pathways to exits are to be marked by illuminated exit signs. Each exit sign (other than internally illuminated signs) are to be illuminated by a reliable light source providing not less than 5 foot-candles on the illuminated surface.
All building or departmental safety equipment (extinguishers, fire hoses, exit signs, emergency lab equipment, etc) need to be inspected at least annually and repaired or replaced if inoperative, damaged or missing. Safety equipment such as extinguishers and fire hoses must be at their designated location, if they are missing they must be replaced (call OFS).
At no time should an exit be blocked. Any doorway or passageway which is not an exit or access to an exit but which may be mistaken for an exit, must be identified by a sign reading "Not An Exit" or a sign indicating it actual use (i.e., "Storeroom").
Q - What fire safety equipment should I have - for an office, a lab, or for a shop?
Generally the distribution of fire extinguishers in these area is governed by the location, type and number of fire hazards in the area. OSHA requires that the travel distance from a Class A and Class D fire hazard to a fire extinguishers must not exceed 75 feet. The maximum travel distance for Class B extinguishers is 50 feet because flammable liquid fires can get out of control faster that Class A fires.
Answer - There are some guidelines for flammable storage found in chapter 2 of the NMSU Laboratory Safety Guide. If the situation is not covered by any of those guidelines, refer your inquiry to the Fire Section (646-2519) or Environmental Health and Safety (646-3327).